PVC Ceiling Panel Calculator

Quickly estimate how many PVC ceiling panels you need for your room, based on your room size, panel size, and brandering direction.

Tip: Before you use the calculator below, read the measuring guide so you choose the correct room length and width.

How to measure your room correctly

To get an accurate PVC ceiling panel estimate, you only need the clear inside dimensions of your room. Use a tape measure and note the measurements in metres (m).

Measure Room Length: distance from one wall to the opposite wall.
Measure Room Width: distance from the other pair of walls.
Always measure in at least two places (front and back) and use the largest value.
Subtract large bulkheads only if they are permanent and will not get PVC panels.

The room area (m²) is simply: Length × Width. The calculator works this out for you automatically.

Panel direction vs brandering direction

PVC ceiling panels are always installed across the brandering (battens), not in the same direction.

If the brandering runs along the length of the room, the PVC panels will run along the width.
If the brandering runs along the width of the room, the PVC panels will run along the length.
In the calculator, choose which side of the room your brandering runs along so we know which side becomes the panel length.

Panel length will follow the side of the room that is opposite to the brandering direction. This is important for a correct panel count and for beautiful, straight lines in the finished ceiling.

PVC Panel Quantity Calculator

Enter your room size and panel size below. The calculator will automatically run the panels opposite to your brandering direction.

Room length (m) Measure along the longer wall of the room.

Room width (m) Measure from the opposite pair of walls.

Brandering runs along If brandering runs along the length, panels will run along the width (and vice versa).

Panel width Choose a panel width (fixed options).

Panel length (m) Choose the board length closest to the room span.

Wastage allowance

10%

Fixed 10% wastage incorporated in the calculation to give one or two extra panels on your order in case of installation mishap's or damages.

Note: The calculator assumes panels are installed opposite to the brandering direction, as recommended.

Please enter all values greater than zero to calculate.

Live estimate – for planning only

Room area 0.00 m²

Panels along span 0 panels

Panels across width 0 panels

Wastage allowance 10%

Recommended total panels 0

This is a guide only. Final quantities may change based on room shape, cutting pattern and installer preference.

Before you order your PVC panels

Use this calculator as a planning guide. We recommend confirming final quantities on site, taking into account any bulkheads, cut-outs, and the exact brandering layout.

Double-check all measurements on site before placing your order.
Discuss panel direction and starting point with your installer so ceilings line up neatly.
For large or irregular rooms, send us your measurements for a detailed take-off.